HOLLYLAND PYRO H RECEIVER

HOLLYLAND COSMO C1
Hollyland Cosmo C1 is a kit of a emitter and a video/audio point-to-point receiver in real-time HD video (up to 1080p60), with HDMI connections (only input or only output) and SDI (input and loop on the transmitter and double output on the receiver). Both parts, emitter and receiver, are delivered in a couple of compact, robust and light bodies, forming an effective wireless solution for short-range transmission with ultra low latency of 0.04ms, and able to transmit and receive signal up to a maximum distance of about 300 meters (according to circumstances).

Cosmo C1 also includes a function that allows you to connect the receiver to a computer and use it in UVC Pull-stream mode as if a webcam was treated, so it is possible to give a wireless signal to a video conference or realization software. The kit can be fed (9W consumption) used USB-C feeders, a conventional feeder or by type L batteries of Sony (or supported). 1 year warranty.

The product kit includes

Cosmo C1 Transmitter
Cosmo C1 Receiver
4 x Antenna
2 x Mushroom Antenna
Shoe Mount
Pan/Tilt Mount with Shoe Mount
USB Type-C Adapter
DC Adapter

Note: This model does not allow the use of various RX or monitor apps.

Hollyland Cosmo C2 is a kit of a emitter and a video/audio point-to-point receiver in real time HD video (up to 1080p60), capable of transmitting and receiving signal up to a maximum distance of 1Km meters (according to circumstances). 2 years warranty.

Includes HDMI (only input or output only) and SDI (input and loop on the transmitter and double output on the receiver). Both parts, emitter and receiver, are delivered in a pair of compact, robust and lightweight bodies, forming an effective wireless solution for short-range transmission with ultra low latency of 33 milliseconds (2 frames in 1080p60)

Cosmo C2 also includes special functions such as the ability to connect two transmitters to a receiver (and this extract double video signal), detection and automatic change of frequencies, connection of the receiver to a computer and use it in UVC Pull-stream mode as if of a webcam it was treated, transmit to YouTube or other RTMP platforms, offer IP output signal ethernet RJ45 of type NDI-HX 3 (of low streaming)

The emitter (210 grams) can be powered (10W of consumption) by means of a Sony L feeder or battery (or compatible), and the receiver (440 grams 11w of consumption) using a VLock power supply or battery (including height).

The product kit includes

Cosmo C2 Transmitter
Cosmo C2 Receiver
7 antennas
Shoe Mount
USB Type-C Adapter
DC Adapter

Note: This model does not allow the use of monitor apps.

Hollyland Cosmo C2 is a kit of 2 emitters and 1 video receiver/audio point-to-point in real time HD video (up to 1080p60), able to transmit and receive signal up to a maximum distance of 1Km meters (according to circumstances). 2 years warranty.

Includes HDMI (only input or output only) and SDI (input and loop on the transmitter and double output on the receiver). Both parts, emitter and receiver, are delivered in a pair of compact, robust and lightweight bodies, forming an effective wireless solution for short-range transmission with ultra low latency of 33 milliseconds (2 frames in 1080p60)

Cosmo C2 also includes special functions such as the ability to connect two transmitters to a receiver (and this extract double video signal), detection and automatic change of frequencies, connection of the receiver to a computer and use it in UVC Pull-stream mode as if of a webcam it was treated, transmit to YouTube or other RTMP platforms, offer IP output signal ethernet RJ45 of type NDI-HX 3 (of low streaming)

The emitter (210 grams) can be powered (10W of consumption) by means of a Sony L feeder or battery (or compatible), and the receiver (440 grams 11w of consumption) using a VLock power supply or battery (including height).

The product kit includes

Cosmo C2 Transmitter x2
Cosmo C2 Receiver
7 antennas
Shoe Mount
USB Type-C Adapter
DC Adapter

Note: This model does not allow the use of monitor apps.

Side handle for better grip and more comfortable use of Mars transmitters monitors.

Side pair for better grip and more comfortable use of Pyro transmitters monitors.

Lavalier capsule for LARK MAX wireless emitters.

HOLLYLAND HL-PSU-LEMO
Power supply Lemo 2 pins for compatible transmitters kits.

HOLLYLAND HL-RJ45
Hollyland USB-TypeC Adapter to RJ45 (HL). Includes adapter and cable. This adapter is compatible with the receiver included in the Mars 400S Pro kit and helps to integrate the receiver output into a local network to be used in streaming environments.

HOLLYLAND MARS 4K
Hollyland Mars 4K is a wireless video/audio link that supports UHD and HD resolutions, and includes 3G-SDI (HD only) and UHD-HDMI (up to 30p in UHD and 60P in FullHD) connections at the input of the input transmitter and output SDI-HDMI in the receiver. Both equipment are built in a pair of compact and reinforced but lightweight bodies. This set is an effective wireless solution for short-range HD or UHD transmission with minimal latency (0.06s milliseconds) up to a maximum distance of about 150 meters (according to circumstances).

The box does not include power supply systems, which can be USB-C (5V/2A), barrel connection or NP-F batteries. 1 year warranty.

Note: The transmitter (TX) allows you to transmit a signal and receive it on up to 4 mobile devices (app called Hollyview), or up to 2 receivers (RX), or 1 RX and 2 mobile devices.

HOLLYLAND MARS 4K RX
The Hollyland Mars 400 4K wireless video link is a UHD-HD video/audio receiver with 3G-SDI and UHD-HDMI connections (up to 30p in UHD and 60P in FullHD). It is built in a compact, reinforced but lightweight body. It is an effective wireless solution to receive a short HD or UHD signal with minimal latency (0.06s milliseconds) up to a maximum distance of about 150 meters (according to circumstances). This equipment is compatible with the TX transmitter and the Mars M1 monitor.

The box does not include power supply systems, which can be USB-C (5V/2A), barrel connection or NP-F batteries. 1 year warranty.

HOLLYLAND MARS 4K TX
The Hollyland Mars 400 4K wireless video link is a UHD-HD video/audio transmitter with 3G-SDI and UHD-HDMI connections (up to 30p in UHD and 60P in FullHD) at the input of the input transmitter and output SDI-HDMI in the receiver. It is built in a compact, reinforced but lightweight body. It is an effective wireless solution for short-range HD or UHD transmission with minimal latency (0.06s milliseconds) up to a maximum distance of about 150 meters (according to circumstances).

The box does not include power supply systems, which can be USB-C (5V/2A), barrel connection or NP-F batteries. 1 year warranty.

KIT DE DOS PANTALLAS M1 ENHANCED

The Mars M1 Enhanced is a versatile 400 gram weight wireless monitor that supports HD and UHD 4K resolutions, and integrates transmitter functions, or receiver with HDMI input and output connections (up to 4Kp30) and HD-SDI. The 5.5" integrated touchscreen of 1,000 luminosity nits, allows you to work with it outdoors with light, while offering revolutionary advantages such as precise color calibration, the Rec.709 color range, and other professional image analysis functions (wave shape, lut load, zebra pattern, aspect mark, image flip, anamorphic de-squeeze...). The device supports an impressive range of up to 150 meters and has a low latency of only 0.08 seconds (80 milliseconds), which allows greater flexibility in the implementation of the device and ensures smooth monitoring without noticeable delays. In addition, a single Mars M1 Enhanced transmitter can be easily connected with up to two receivers or four mobile device applications. As a special function to highlight the ability to record up to 2 minutes of video in a volatile memory, for immediate and ephemeral reviews. The unit is powered by a NP-F battery (not included) to external sources through barrel connector. 1 year warranty.

HOLLYLAND PYRO 7
7" wireless transmission monitor with reach 400 m.
Main features:
- 1TX And 4RX
- Scope 400 m and latency of 0.06 s
- Dual Band 2.4 GHz and 5 GHz
- Automatic frequency balance
- TX, RX, and Monitor - All in One
- Dual-View Quick Monitoring Switch
- 7 inches and 1200 nits
- Accurate image analysis
- Output in SDI and HDMI loop
- Streaming RTMP

Includes: 1x Wireless transmission monitor Pyro 7, 2x Pallet antenna (2.4 GHz and 5 GHz), 1x User Manual, 1x Warranty Card, 1x D-Tap to CC Power Adapter Cable with Lock, 1x Secure Digital Memory Card (32 G) and 1x USB-C OTG Adapter.

HOLLYLAND PYRO 7
7" wireless transmission monitor with reach 400 m.
Main features:
- 1TX And 4RX
- Scope 400 m and latency of 0.06 s
- Dual Band 2.4 GHz and 5 GHz
- Automatic frequency balance
- TX, RX, and Monitor - All in One
- Dual-View Quick Monitoring Switch
- 7 inches and 1200 nits
- Accurate image analysis
- Output in SDI and HDMI loop
- Streaming RTMP

Includes: 1x Wireless transmission monitor Pyro 7, 2x Pallet antenna (2.4 GHz and 5 GHz), 1x User Manual, 1x Warranty Card, 1x D-Tap to CC Power Adapter Cable with Lock, 1x Secure Digital Memory Card (32 G) and 1x USB-C OTG Adapter.

Category: USED

HOLLYLAND PYRO 7 KIT
Pack 2 7" wireless transmission monitors with 400 m
Main features:
- 1TX And 4RX
- Scope 400 m and latency of 0.06 s
- Dual Band 2.4 GHz and 5 GHz
- Automatic frequency balance
- TX, RX, and Monitor - All in One
- Dual-View Quick Monitoring Switch
- 7 inches and 1200 nits
- Accurate image analysis
- Output in SDI and HDMI loop
- Streaming RTMP

Includes: 2x Wireless transmission monitor Pyro 7, 5x Antena Paddle (2.4 GHz and 5 GHz), 1x USB-C OTG adapter, 2x DC power adapter cable from D-Tap to block, 1x Hollyland ecosystem brochure, 2x Secure Digital memory card (32G), 1x User manual and 1x Warranty card.

The Hollyland Pyro H is a wireless video transmission system that allows you to transmit high-quality video signals up to 4K-UHD (2160p30) at a maximum distance of 400 metres (with a straightforward view of obstacles).

This kit includes a transmitter and a receiver (with the possibility of sending up to four physical receivers, or two physicists and two apps) that include HDMI-A connections (with loop on the issuer), 8 to 12 Mbps compression, channel scan, UVC Plug-and-Play compatibility for streaming, etc.

This system is ideal for audiovisual industry professionals who need to transmit high-quality video signals in different environments. 2 years warranty.

Note: The equipment can be powered by NP-F batteries (not included), via USB-C 5V (not included), or manufacturer's power supply (not included).

HOLLYLAND PYRO H
4K HDMI Video Transmission Kit
- Set of 1 transmitter and 1 wireless receiver
- Transmit video UHD 4K30 to 400m
- HDMI output, output and output loop
- Frequency bands of 2.4 and 5 GHz
- Compatible with UVC Plug-and-Play for streaming
- Transmission to 650' in Broadcast mode
- Smart Channel Exploration, Bright LCD
- Low 60 ms latency, 12 Mb/s bit rate
- DC Power Options, L Series and USB-C

Category: ABIERTA CAJA

Hollyland Pyro S is a wireless video transmission system that supports resolutions up to 4K to 30fps, transmitting up to 4 receivers simultaneously, and at a range of up to 400 meters with a minimum 50 m (about 5 frames) Equipped with Auto Dual-Band Hopping (ADH), the Pyro S ensures a stable and uninterrupted transmission, ideal for film productions, events at ENFP/EG 1 year warranty.

Main features
Transmission to multiple receivers: allows you to connect up to four receivers with a single transmitter using Wifi Broadcast technology.
Scope and latency: stable transmission up to 400 meters with a minimum 50 m high thanks to 2.4 GHz Dual-Band technology and 5 GHz.
Automatic jump frequency: automatic selection of the clearest channel to avoid interference and frequency congestion.
HDMI and SDI inputs and outputs: HDMI and SDI inputs in the transmitter, and HDMI and SDI outputs in the receiver for greater flexibility.
4K transmission: maximum capacity 4Kp30, providing sharp and detailed images.
Streaming UVC and RTMP: compatible with live streaming devices and easy integration with popular platforms.
Smart Channel Scan: Automatic selection of high-quality channels when switching on, with real-time monitoring available on the receiver.
Cooling system: 3-speed fan adjustment for efficient temperature regulation.
LCD screen: status monitoring and config through an easy-to-read LCD display.
Power Options: compatible with NP-F batteries and continuous power supply (DC).

Kit Content: TX Pyro S, RX Pyro S, 4 antennas, 2 mushroom-type antennas, shoe mount, Pan/Tilt mount with Pan/Tilt mount with shoe, Type-C USB adapter, DC adap

Hollyland Pyro S is a high-definition wireless video transmission system that supports resolutions up to 4K to 30fps. Designed for professional applications, this device allows the transmission up to four receptors simultaneously with a range of up to 400 meters and a minimum length of 50 ms. Equipped with Auto Dual-Band Hopping (ADH), the Pyro S ensures a stable and uninterrupted transmission, ideal for film productions, live events and ENG/EFP applications. 1 year warranty.

Main features
Transmission to multiple receivers: allows you to connect up to four receivers with a single transmitter using Wifi Broadcast technology.
Scope and latency: stable transmission up to 400 meters with a minimum 50 m high thanks to 2.4 GHz Dual-Band technology and 5 GHz.
Automatic jump frequency: automatic selection of the clearest channel to avoid interference and frequency congestion.
HDMI and SDI inputs and outputs: HDMI and SDI inputs in the transmitter, and HDMI and SDI outputs in the receiver for greater flexibility.
4K transmission: maximum capacity 4Kp30, providing sharp and detailed images.
Streaming UVC and RTMP: compatible with live streaming devices and easy integration with popular platforms.
Smart Channel Scan: Automatic selection of high-quality channels when switching on, with real-time monitoring available on the receiver.
Cooling system: 3-speed fan adjustment for efficient temperature regulation.
LCD screen: status monitoring and config through an easy-to-read LCD display.
Power Options: compatible with NP-F batteries and continuous power supply (DC).

Kit Content: TX Pyro S, RX Pyro S, 4 antennas, 2 an

Extra receiver compatible with Pyro S-TX. The equipment is able to receive signal at a maximum of 400 meters, and includes HDMI video output (up to a resolution and frame rate maximum UHDp30), SDI (up to 3G-1080p60) and UVC, which allows you to connect the video transmitter to a computer and that it becomes a capturer. 1 year warranty.

HOLLYLAND PYRO TRANSMISSION KIT
Pyro S transmission pack and Pyro 7 monitoring
Main features:
- 1TX And 4RX
- Scope 400 m and latency of 0.06 s
- Dual Band 2.4 GHz and 5 GHz
- Automatic frequency balance
- TX, RX, and Monitor - All in One
- Dual-View Quick Monitoring Switch
- 7 inches and 1200 nits
- Accurate image analysis
- Output in SDI and HDMI loop
- Streaming RTMP

Includes: 1x Wireless Pyro S, 1x Wireless video receiver Pyro S, 1x Wireless transmission monitor Pyro 7, 9x Palette antenna (2.4 GHz and 5 GHz), 2x Side and lower aluminium handle, 1x monitor cover (7 inches), 1x memory card Secure Digital (32G), 1x adapter 1x

HOLLYLAND SYSCOM 421
Hollyland Syscom 421-4 is a wireless HD video transmission kit (up to 1080p60) capable of transmitting and receiving up to 550 meters in optimal conditions. The set includes 4 transmitters with SDI-HDMI inputs capable of transmitting with a 0,07ms latency against a single receiver, which in turn delivers 4 HDMI/SDI outputs. The electronics of the kit allows a frequency scan to detect possible interference and avoid them, as well as to shoot tally signals (not included and optional) and transmitter control protocols RS485/RS422 to support the handling of control desks for PTZ cameras. It also has a RJ45 port to make Streaming RTSP.

The transmitters are equipped with L series battery plate and the receiver is equipped with a V-Lock battery. Both transmitters and the receiver can also be fed through a DC adapter.

1 year warranty.

Note: This model does not allow the use of various RX or monitor apps.

HOLLYLAND SYSCOM 421 (Used)
Hollyland Syscom 421-4 is a wireless HD video transmission kit (up to 1080p60) capable of transmitting and receiving up to 550 meters in optimal conditions. The set includes 4 transmitters with SDI-HDMI inputs capable of transmitting with a 0.7ms latency against a single receiver, which in turn delivers 4 HDMI/SDI outputs. The electronics of the kit allows a frequency scan to detect possible interference and avoid them, as well as to shoot tally signals (not included and optional) and transmitter control protocols RS485/RS422 to support the handling of control desks for PTZ cameras. It also has a RJ45 port to make Streaming RTSP.

The transmitters are equipped with L series battery plate and the receiver is equipped with a V-Lock battery. Both transmitters and the receiver can also be fed through a DC adapter.

1 year warranty.

Note: This model does not allow the use of several TX or monitor apps.

Category: USED

HOLLYLAND SYSCOM 421-1
Transmitter compatible with the Syscom 421 2 or 4 transmitters kit. In the 4 kit this piece can work as a spare, while in the 2 kit this additional transmitter can extend the original set of two transmitters and a receiver in 3 or up to 4 maximum.

This transmitter has a range of up to 550 meters in optimal conditions, a 0.7ms latency against your receiver, HDMI and/or HD-SDI video inputs, and RS485/RS422/RTSP connections/protocols to support your use with PTZ cameras or other communication protocols. At the power level the transmitter equips battery plate of the L series (battery not included) and DC adapter. 1 year warranty.

HOLLYLAND SYSCOM 421-2
Hollyland Syscom 421-2 is a wireless HD video transmission kit (up to 1080p60) capable of transmitting and receiving up to 550 meters in optimal conditions. The set includes 2 transmitters with SDI-HDMI inputs capable of transmitting with a 0.7ms latency against a single receiver, which in turn delivers 4 HDMI/SDI outputs. The electronics of the kit allows a frequency scan to detect possible interference and avoid them, as well as to shoot tally signals (not included and optional) and transmitter control protocols RS485/RS422 to support the handling of control desks for PTZ cameras. It also has a RJ45 port to make Streaming RTSP.

The transmitters are equipped with L series battery plate and the receiver is equipped with a V-Lock battery. Both transmitters and the receiver can also be fed through a DC adapter.

1 year warranty.

Note: This model does not allow the use of various RX or monitor apps.