EDELKRONE SLIDERPLUS PRO COMPACT

EDELKRONE MODULE
Confers to SliderPLUS v5 automated slide movement both horizontal and tilted (up to 22.5° with 5.5 lb)
Can be controlled with your hand
Wireless Connectivity with HeadONE or HeadPLUS/HeadPLUS PRO
Operation without extremely precise strike and loop movement
Compatible with edelkrone application or edelkrone controller
Ultrasilious operation
Auto-off and energy saving modes for better battery management
Compatible with all SliderPLUS models purchased from January 2016
Works with two Canon LP-E6 or two NP-F batteries
It can also work with a CA-CC adapter
High contrast OLED screen for instant information
Completely CNC machining aluminum structure
Battery brackets not included (sold separately)
INCLUYE AC/DC_ADAPTER AND SONY_NP-F_BATTERY

EDELKRONE SLIDERONE
- Ultra-compact motorized sliding system for camera
- Ultrasilious operation
- Ultra-precise non-contragolese operation
- Smart phone controlled via Bluetooth
- Can be easily programmed to record fast camera
- Can be paired and used with HeadONE or HeadPLUS
- Camera path: 20 cm (8 in).
- Load capacity: 9 kilos (20 lb)
- Vertical load capacity at 90°: 2.3 kg (5 lb)
- Actual size: 270 x 95 x 50 mm (10.6 x 3.7 x 1.9 in)
- 5.5 kg (12 pounds) real weight
- Works with a Canon LP-E6 battery
- Completely CNC machining aluminum structure

EDELKRONE SLIDERONE (Usado)
- Ultra-compact motorized sliding system for camera
- Ultrasilious operation
- Ultra-precise non-contragolese operation
- Smart phone controlled via Bluetooth
- Can be easily programmed to record fast camera
- Can be paired and used with HeadONE or HeadPLUS
- Camera path: 20 cm (8 in).
- Load capacity: 9 kilos (20 lb)
- Vertical load capacity at 90°: 2.3 kg (5 lb)
- Actual size: 270 x 95 x 50 mm (10.6 x 3.7 x 1.9 in)
- 5.5 kg (12 pounds) real weight
- Works with a Canon LP-E6 battery
- Completely CNC machining aluminum structure

Category: USED

EDELKRONE SLIDERONE LIGHT
Edelkrone SliderONE Light
Manual control. Camera movement of 15 cm.

EDELKRONE SLIDERONE PRO
- Ultra-compact motorized sliding system for camera
- Ultrasilious operation
- Ultra-precise non-contragolese operation
- Smart phone controlled via Bluetooth
- Can pair and work with HeadONE or HeadPLUS/HeadPLUS PRO
- Can be easily programmed to record fast camera
- Camera path: 20 cm (8 in).
- Load capacity: 13.6 kg (30 lb)
- Vertical load capacity at 90°: 4.5 kg (10 lb)
- Actual size: 288 x 105 x 52 mm (11.3 x 4.1 x 2.1 in)
- Actual weight: 1.5 kg (3.3 lb)
- Works with a Canon LP-E6 battery
- Completely CNC machining aluminum structure

EDELKRONE SLIDERPLUS COMPACT
It offers the double camera route that the standard sliding systems of the same size
Camera tour in tripod of 1.3 ft (40 cm). (0.7 ft (20 cm) without tripod)
Load capacity (on the ground): 22.5 kg (50 lb)
Load capacity: 6.8 kg (15 lb) on tripod
Inclined slide movement with Slide Module v3 (up to 22.5° for 5.5 lb)
Effective length of structure: 33 cm (13 in)
Effective weight of the structure: 1.4 kg (3 lb)
Manual operation (add stabilizing module)
It can be motorized (advert Slide Module v3)
It has folding legs integrated with locking mechanism
Completely CNC machining aluminum structure

EDELKRONE SLIDERPLUS LONG
It offers the double camera route that the standard sliding systems of the same size
2.6 ft (80cm) camera travel on tripod. (1.3 ft (40 cm) on ground)
Load capacity (on the ground): 18 kg (40 lb)
10 lb (4.5 kg) carrying capacity (on tripod)
Inclined slide movement with Slide Module v3 (up to 22.5° for 5.5 lb)
Effective length of structure: 53 cm (21 in)
Effective weight of the structure: 1.4 kg (3.2 lb)
Manual operation (add stabilizing module)
It can be motorized (advert Slide Module v3)
It has folding legs integrated with locking mechanism
Completely CNC machining aluminum structure
INCLUYE STEADY_MODULE

EDELKRONE SLIDERPLUS PRO COMPACT
It offers the double camera route that the standard sliding systems of the same size
1.6 ft (50cm) camera travel on tripod. (0.8 ft (25 cm) on ground)
Load capacity (on the ground): 22.5 kg (50 lb)
Load capacity: 11.3 kg (25 lb) (on a tripod)
Inclined slide movement with Slide Module v3 (up to 22.5° for 5.5 lb)
Effective length of structure: 43 cm (17.2 in)
Actual weight: 1.5 kg (3.4 lb)
Manual operation (add stabilizing module)
It can be motorized (advert Slide Module v3)
It has folding legs integrated with locking mechanism
Completely CNC machining aluminum structure
INCLUYE STEADY_MODULE

EDELKRONE SLIDERPLUS PRO LONG
It offers the double camera route that the standard sliding systems of the same size
2.9 ft (90cm) camera travel on tripod. (1.4 ft (45 cm) on ground)
Load capacity (on the ground): 18 kg (40 lb)
Charging capacity: 9 kg or 20 lb (in tripod)
Inclined slide movement with Slide Module v3 (up to 22.5° for 5.5 lb)
Real length: 63 cm (25 in)
Actual weight: 1.8 kg (4 lb)
Manual operation (add stabilizing module)
It can be motorized (advert Slide Module v3)
It has folding legs integrated with locking mechanism
Completely CNC machining aluminum structure

EDELKRONE STEADY MODULE
- Incorporates Steadymove® function in SliderPLUS
- Allows ultrasound and stable slide speeds
- Replaceable friction voltage.
- Compatible with all SliderPLUS models that have been acquired since 2016
- Completely CNC machining aluminum structure

Steady Module for Slider Plus.

Category: USED

EDELKRONE WING
- WING for DSLR rings and medium weight chambers
- Recommended camera weight: 7.2 kg (16 lb) or less.
- Camera path: 40 cm (1.3 ft)
- Weight: 1.4 kg (3 lb)
- Dimensions (long x width x height): 17,6 x 60 x 8.9 cm (6.9 x 2.4 x 3.5 in)
- Assembly options: 3/8"-16 assembly port at the bottom. 1/4"-20 assembly screw at the top.
- Materials: CNC machining aluminum and stainless steel parts.
- Includes screw adapter from 1/4” to 3/8” and 1/4 reducer bearing.

EDELKRONE WING PRO
- WING PRO for heavier production chambers
- Camera weight recommended: 48 lb (21.7 k) or less
- Camera path: 40 cm (1.3 ft)
- Weight: 2 kg (4.4 lb)
- Dimensions (long x width x height): 18.4 x 70 x 10.2 mm (7.2 x 2.75 x 4 in)
- Assembly options: 3/8"-16 assembly port at the bottom. 3/8"-16 assembly screw at the top.
- Materials: CNC machining aluminum and stainless steel parts.